Berry Smoothie Brightening Cream

Skin Care

Berry Smoothie Brightening Cream

By: Christine Esposito

Editor-in-Chief

Ingredients

%

Phase A

Safflower Oil (Coast Southwest, Inc.) (Carthamus tinctorius (safflower) seed oil)
2.00

Colorless Jojoba Oil (Coast Southwest, Inc. Jojoba Desert) (Simmondsia chinensis (jojoba) seed oil)
4.00

Vitamin E Acetate (Coast Southwest, Inc.) (Tocopheryl acetate)
0.50

Endimate 33V (Coast Southwest, Inc.) (Caprylic/capric triglyceride)
4.00

Endimate IPM (Coast Southwest, Inc.) (Isopropyl myristate)
3.00

Endicare TN (Coast Southwest, Inc.) (C12-15 alkyl benzoate)
2.00

Phase B

Olivatis 12 (Coast Southwest, Inc., Medolla Limited)(Polyglyceryl-3 pentaolivate)
7.00

Creabase MSO (Coast Southwest, The Innovation Company) (Limnanthes alba (meadowfoam) seed oil (and) cera alba (and) hydrogenated meadowfoam seed oil)
1.50

Sunflower Wax (Coast Southwest, Inc.) (Helianthus annuus (sunflower) seed oil)
0.25

Phase C

Deionized water
63.95

Dissolvine NA2-S (Coast Southwest,Akzo Nobel Functional Chemicals) (Disodium EDTA)
0.20

Glycerin (Coast Southwest, Inc.) (Glycerin)
1.00

Propylene Glycol (Coast Southwest, Inc.) (Propylene glycol)
3.50

GlyAcid 99 HP (Coast Southwest, CrossChem)(Glycolic acid)
4.00

NaOH 40% aq. Solution (Sodium hydroxide)
q.s.

Nordic Beauty Lingonberry Dispersion (Coast Southwest, The Innovation Company) (Water (and) vaccinium vitis-idaea fruit extract (and) maltodextrin (and) sodium benzoate (and) potassium sorbate)
1.50

NaCl (Sodium chloride)
0.60

Sharomix EG14 Coast Southwest, Sharon-Laboratories)(Ethylhexylglycerin (and) phenoxyethanol)
1.00

Procedure

Phase A – In main vessel, combine Phase A ingredients under propeller mixing and begin heating to 70-75°C. Phase B – Once at desired temperature, add phase B to phase A with continuous mixing. Phase C – Disperse Phase C in a separate vessel until a uniform mixture is formed. Adjust pH of GlyAcid 99 HP using NaOH to pH above 4.2. Add Phase C to Phase AB slowly under agitation of 500-600 rpm while maintaining the temperature above 70°C. Adjust the mixing speed to combine the two phases with a small vortex. Continue mixing the solution for 15 to 20 minutes until fully uniform. Switch to homogenizer and homogenize for 30 seconds at 3.0 rpm while the emulsion is still at 70°C. Once complete, allow to cool and transfer to a holding vessel.